Abstract:
Dye-sensitized nanoporous TiO2 solar cell is a promising system for cost-efficient solar
energy conversion application. In these solar cells, Ruthenium-based dye molecules,
adsorbed on the surface of a sintered nanoporous TiO2 film, are used to absorb visible
light and to inject electrons into the conduction band of the TiO2. 2,2’,7,7’-tetrakis-
(N,N-di-4-methoxy phenylamino)-9,9’-spirobifluorene (spiro-MeOTAD) material is
used as a hole transporting material to regenerate the photo-oxidized dye molecule.
Platinum coated FTO (Fluorine doped Tin Oxide) glass is used as the top contact of the
solar cell. This study focuses on the performance of the natural dye extracted from
grape (Vitis vinifera) fruit coat in the dye sensitized solar cell. UV-VIS absorbance
spectrum of nanocrystalline TiO2 films coated with Ruthenium-based commercially
available dye [cis-bis(isothiocyanato)(2,2’-bipyridyl-4,4’-dicarboxylato)(2,2’-
bipyridyl-4,4’-dinonyl) ruthenium (II)] and natural dye extracted from grape fruit coat
were taken. Absorbance spectrums show a similar characteristics for both dye extracted
from grape fruit coat and commercial Z907 dye on the nanoporous TiO2 film. This may
be attributed to the strong interaction between the surface of TiO2 nanoporous film and
the carbonyl and hydroxyl groups of molecule on grape fruit coat extract. Currentvoltage
measurements of these dye-sensitized solar cells were obtained under
simulated (100mWcm-2, AM 1.5) solar illumination using a computer controlled
source measure unit (Keithley-2400). External quantum efficiency (EQE) spectra
were obtained using a calibrated silicon photodiode (Newport). Results obtained
show that the natural dye extracted from grape fruit coat gives promising performance
compared to the commercial dye in the solar energy conversion process.
