Please use this identifier to cite or link to this item: http://ir.lib.seu.ac.lk/handle/123456789/6298
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGurunanthanan, V.-
dc.contributor.authorPerera, H. C. S.-
dc.contributor.authorDassanayake, B. S.-
dc.contributor.authorGunathilake, S. S.-
dc.date.accessioned2022-11-30T07:30:34Z-
dc.date.available2022-11-30T07:30:34Z-
dc.date.issued2022-11-15-
dc.identifier.citation11th Annual Science Research Sessions 2022 (ASRS-2022) Proceedings on "“Scientific Engagement for Sustainable Futuristic Innovations”. 15th November 2022. Faculty of Applied Sciences, South Eastern University of Sri Lanka, Sammanthurai, Sri Lanka. pp. 32.en_US
dc.identifier.isbn978-624-5736-60-7-
dc.identifier.urihttp://ir.lib.seu.ac.lk/handle/123456789/6298-
dc.description.abstractIndustrial dye effluents are a significant concern and require to be treated before being discharged into the environment. Magnesium oxide (MgO) has been known as an excellent adsorbent for a variety of environmentally polluted compounds. This study synthesizes Fe@MgO nanocomposites via a facile precipitation calcination approach by using tetraethyl orthosilicate (TEOS) as a protective and coupling agent to remove the methylene blue in the wastewater. Powder X-ray diffraction analyses (XRD) were performed to characterize the physical properties of synthesized Fe@MgO nanocomposites and scanning electron microscopy (SEM) was used to observe their morphology and particle size, and the X-ray photoelectron spectroscopy (XPS) method was used to obtain the elemental composition as well as the chemical and electronic state of the atoms within a material. The adsorption performance was studied by batch experiments using a UV- vis spectrometer for methylene blue dye (MBD) removal. The results showed that as-prepared Fe@MgO nanocomposites are composed of cubic structures of Fe, Fe3O4, and MgO with granular morphology. Fe3O4 shows magnetic properties while, Mg, Fe, and O are in the electronic configuration of 1s, 2p, and 1s with 1302.2 eV, 710 eV, and 530 eV respectively. The contact time of the as-prepared Fe@MgO for methylene blue dye was 120 min. Langmuir model fitted better with the experimental data of methylene blue adsorption with higher correlation coefficients (R2>0.9911), suggesting the methylene blue adsorption onto Fe@MgO is monolayer chemisorption. Furthermore, the maximum adsorption capacity (QM) calculated by the Langmuir model was 1857.0 mg g-1 which was close to the experimental value of 1440.0 mg g-1 . It was found that the adsorption process was very fast, and the adsorption capacity of Fe@MgO was higher compared to Fe3O4/carboxymethyl-β-cyclodextrin (CM-β-CD), MgFe2O3@SiO2, and Cobalt zinc ferrite.en_US
dc.language.isoen_USen_US
dc.publisherFaculty of Applied Sciences, South Eastern University of Sri Lanka, Sammanthurai.en_US
dc.subjectAdsorptionen_US
dc.subjectMagnetic MGOen_US
dc.subjectMethylene Blue Dyeen_US
dc.subjectPrecipitation Calcinationen_US
dc.titleDevelopment of Fe@MGO nanoparticles for enhancing the adsorption of methylene blue dyeen_US
dc.typeArticleen_US
Appears in Collections:11th Annual Science Research Session - FAS

Files in This Item:
File Description SizeFormat 
Proceedings ASRS-2022 final-56.pdf142.56 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.